RTA 460BS-NNA1 Product User Manual Download

Page: 27 / 64

Real Time Automation, Inc.

1-800-249-1612

Mapping - Transferring Data Between Devices

There are 5 ways to move data from one protocol to the other. You can combine any of the following
options to customize your gateway as needed.

Option 1

–

Data Auto-Configure Mappings:

The gateway will automatically take the data type (excluding

strings) from one protocol and look f

or the same data type defined in the other protocol. If there isn’t a

matching data type, the gateway will map the data to the largest available data type. See Data Auto-
Configure section for more details.

Option 2

–

String Auto-Configure:

The gateway will automatically take the string data type from one

protocol and map it into the other. See String Auto-Configure section for more details.

Option 3

–

Manual Configure Mappings:

If you don’t want to use the Auto

-Configure Mappings

function, you must use the manual mapping feature to configure translations.

Option 4

–

Manipulation/Scaling:

You can customize your data by using math operations, scaling, or bit

manipulation. See Data Mapping-Explanation section for more details.

Option 5

–

Move Diagnostic Information:

You can manually move diagnostic information from the

gateway to either protocol. Diagnostic information is not mapped in Auto-Configure Mappings Mode.
See Diagnostic Info section for more details.

Going from Manual Mapping to Auto-Mapping will delete ALL mappings and
manipulations configured.

Summary of Contents for 460BS-NNA1

































































Search results

Summary of Contents for 460BS-NNA1

Reviews:

Related manuals for 460BS-NNA1

Brands by name

Popular brands

RTA 460BS-NNA1, Product User Manual

Search results

Summary of Contents for 460BS-NNA1

Reviews:

Related manuals for 460BS-NNA1

Brands by name

Popular brands