RTA 460BCA-NNA4 Product User Manual Download

Page: 71 / 81

Real Time Automation, Inc.

1-800-249-1612

Diagnostics

– ASCII

Select ASCII in the top dropdown menu on the Diagnostics Page to view a breakdown of the diagnostics
that are displayed on the page. You may also view individual ASCII device counters and messages by
selecting the device in the

All ASCII

dropdown and clicking

View

. Additional diagnostic information can

be found by clicking the

Help

button.

NOTE

: This page will auto-refresh every five seconds with the latest data.

Clear All Values

- This will only affect displayed values.

This will reset all displayed values back to zero and clear the Status Strings.
Example: If viewing ASCII

–

Port #, this will only clear the values for Port #. This will reduce the

All

ASCII

values indirectly.

Clear Buffers

- This will clear the Next Message to Send from Queue buffer and Current Message being

received from ASCII buffer and any message stored in the Queue.

Summary of Contents for 460BCA-NNA4


















































































Search results

Summary of Contents for 460BCA-NNA4

Reviews:

Related manuals for 460BCA-NNA4

Brands by name

Popular brands

RTA 460BCA-NNA4, Product User Manual

Search results

Summary of Contents for 460BCA-NNA4

Reviews:

Related manuals for 460BCA-NNA4

Brands by name

Popular brands