RST meteoscan 937PRO, Operation Manual, Page: 8 / 68

page 8
RST01937 meteostanciya
Indoor sensor
Remove the battery door on the back of the sensor with a Philips
screwdriver (there is only one screw, at the bottom of the unit). Insert
two AAA batteries as shown in Figure 11 (we recommend lithium bat-
teries for cold weather climates, but alkaline batteries are sufficient for
most climates).
Replace the battery door and set screw. Note that the tempera-
ture, humidity and pressure will be displayed on the LCD display. Look-
ing at the back of the unit from left to right, the polarity is (-) (+) for
the top battery and (+) (-) for the bottom battery.
Figure 11
Initial Display Console Set Up
Connect the power adapter to power up the display console.
The display console starts to register the transmitter and receiver the weather data from
transmitter. The interface as below:
RST01937Manual 25.10.2017 11:57 Страница 8