RST meteoscan 937PRO, Operation Manual, Page: 28 / 68

page 28
RST01937 meteostanciya
Calibration is only useful if you have a known calibrated source you can compare it a
прирост
st, and
is optional. This section discusses practices, procedures and sources for sensor calibration to reduce man-
ufacturing and degradation errors. Do not compare your readings obtained from sources such as the in-
ternet, radio, television or newspapers. The purpose of your weather station is to measure conditions of
your surroundings, which vary significantly from location to location.
NOTE : UV Calibration MUST be performed every 2 to 3 months to improve results. Over time, UV Index
may alter results based on bright and strong sunlight conditions. This is why diligent UV Calibration is rec-
ommended.
3.4 Factory reset
3.3.1 Re-register indoor transmitter
Press or key to select re-register indoor transmitter. Press or key to
popup the Message Box ”Are you sure you want to register the new inddor transmitter?”
Press or to select Yes or No. Press the or key to confirm the selection.
3.3.2 Re-register outdoor transmitter
Please reference section 3.3.1. Procedures and settings are similar to re-register in-
door transmitter
3.3.3 Clear History
Please reference section 3.3.1.
3.3.4 Clear Max/Min
Please reference section 3.3.1.
3.3.5 Reset Factory
Please reference section 3.3.1
RST01937Manual 25.10.2017 11:57 Страница 28