RST meteoscan 937PRO, Operation Manual, Page: 5 / 68

RST01937 meteostanciya
page 5
Feature
Installation
Before placing and installing all components of the weather station at there final desti-
nation, please set up the weather station with all parts being nearby for testing the correct
function.
1. Install wind vane
Push the wind vane into the shaft. as shown in figure 1. Tighten the set screw with as
shown in figure 2. Make sure the wind vane spin freely.
figure 1 figure 2
There are four alphabet letter of “N”,”E”,”S”and “W” around the wind direction, repre-
senting for the direction of North, East, South and West. Wind direction sensor has to be ad-
justed so that the directions on the sensor are matching with your real location. Permanent
wind direction error will be introduced when the wind direction sensor is not positioned cor-
rectly during installation.
2. Install wind speed
Push the wind speed into the shaft. as shown in figure 3.
Tighten the set screw with as shown in figure 5. Make sure the wind speed spin freely.
figure 4 figure 5
RST01937Manual 25.10.2017 11:57 Страница 5