43
42
6.3 DVD Initial settings/Audio settings
͈
Press SETUP button in stopped or playback state.
͉
Point out the SETUP by
Ɗ
or
ƌ
buttons and press
ENTER button.
͊
Select desired setting by
Ɗ
or
ƌ
button and enter
the detailed setting with
Ȟ
button.
͋
Select a desired setting by pressing
Ɗ
or
ƌ
buttons
and press ENTER button to apply it.
͌
You can come out of the detailed settings page by
pressing
Ȝ
button.
• SPDIF OUTPUT :
SPDIF OUTPUT SETTING
SPDIF/RAW
In case of Coaxial/optical output, connection
to the Amp(Dolby digital) with digital
decoder.
SPDIF/PCM
In case of Coaxial output, connection to the
Amp(channel 2) with digital decoder.
OFF
Only analog audio output can be used.
• OP MODE
LINE OUT
: Line out mode, with digital dialog normalization.
DEFAULT
RF REMOD
: RF remodulation mode, with heavy compression
and digital dialog normalization.
• DUAL MONO SETTING
This is similar to the Multiplex television and can work only for
the Disc designed for DUAL MONO program.
Ȟ
STEREO
Outputs proper channels through both right
and left speakers.
Ȟ
L-MONO
Outputs the channel of the left side
through both right and left speakers.
Ȟ
R-MONO
Output the channel of the right side
through both right and left speakers.
Ȟ
MIX-MONO
Outputs through both right and left
speakers by mixing up two channels.
• COMPRESSION
You can use this function to enjoy Dolby Digital sound when
watching movies at low volume at night.
You can adjust the Compression effect which being greater of
smaller.
• PRO LOGIC SETTING
There are three modes of OFF/ON/Auto.
• LPCM OUTPUT :
LPCM OUTPUT SETTING
It uses the LPCM 48K/LPCM 96K format of Audio data.
6.2 DVD Initial settings/Speaker settings
• DOWNMIX :
AUDIO CHANNEL COMPOSITION
This allows you to have a proper Audio output when the Audio
channel composition recorded in the Disc is different from the
one that should be output.
LT/RT
When connected to Dolby Pro Logic Decoder
Amp.
STEREO
When connected to STEREO Amp.
OFF
It is able to setup for 5.1 channel audio.
• CENTER :
CENTRAL SPEAKER SETTING
You can set the central speaker for use by pressing
ON
button.
• REAR :
REAR SPEAKER SETTING
You can set the rear speaker for use by pressing
ON
button.
• SUB WOOFER :
SUB WOOFER SPEAKER
SETTING
You can set the central speaker for use by pressing
ON
button.
• CENTER DELAY :
CENTRAL SPEAKER DELAY
SETTING
You can select central speaker’s delay duration up to 0 ~ 5ms.
• REAR DELAY :
REAR SPEAKER DELAY SETTING
You can select rear speaker’s delay duration up to 0 ~ 15ms.
• TEST TONE :
TEST TONE SETTING
You can select test tone’s ON or OFF.
• BASS :
BASS SPEAKER SETTING
You can select bass speaker’s config1 or config2.
͈
Press SETUP button in stopped or playback state.
͉
Point out the SETUP by
Ɗ
or
ƌ
buttons and press
ENTER button.
͊
Select desired setting by
Ɗ
or
ƌ
button and enter
the detailed setting with
Ȟ
button.
͋
Select a desired setting by pressing
Ɗ
or
ƌ
buttons
and press ENTER button to apply it.
͌
You can come out of the detailed settings page by
pressing
Ȝ
button.
