RSL Speedwoofer 10S, Owner'S Manual

Page: 14 / 20

Connec ng Your Subwoofer Wirelessly
If you have di ffi culty running an RCA cable to the subwoofer, you can connect the Speedwoof-
er 10S wirelessly. The Speedwoofer 10S comes with a built-in wireless receiver. You’ll need the
op onal RSL AT1 Wireless Audio Transmi er. Connect the transmi er to your A/V receiver or
processor’s subwoofer or LFE output. When you fi rst setup the RSL Speedwoofer 10S for wire-
less use, you will need to pair it with the wireless transmi er.
Wireless Transmi er Pairing Instruc ons
1. Connect the transmi er to the USB power source.
2. Plug in the Speedwoofer and turn on the power.
3. The light on the transmi er will be fl ashing slowly. Push and hold the transmi er’s pairing
bu on un l it fl ashes more rapidly. Then release the bu on.
4. Immediately press and hold the pairing bu on on the Speedwoofer un l the light on the
transmi er becomes solid.
5. Release the bu on. Your Speedwoofer is now paired. If pairing fails, temporarily place
transmi er closer to the Speedwoofer and away from other Wi-Fi devices. Repeat the above
procedure.
Another use for a wireless connec on is that it makes it easier to try the subwoofer in di ff er-
ent loca ons, before running a wired connec on. The wireless transmi er normally has a 30
. range. Its signal can be a ff ected by interference from wireless networks, large objects and
other electronic devices.
Wireless Subwoofer Connec on
Op onal Wireless Transmi er Subwoofer Wireless Pairing Bu on
14