RSL CG24 Monitor Owner'S Manual Download | Manualshive

Page: 28 / 48

background image

26

INSTALLATION— Continued

Connecting Your RSL Speedwoofer And Remote Receiver Box

Your RSL Speedwoofer

tm

10 connects to your receiver exactly the same way

any other subwoofer does, so please refer to the appropriate section above. The RSL
Speedwoofer

tm

comes equipped with a separate remote receiver box and wireless

remote control transmitter. This receiver box is responsible for your Speedwoofer’s
volume and crossover frequency controls (the Speedwoofer’s frequency control is not
used in a home theater system). The wireless remote allows you to adjust the volume
and crossover frequency from the convenience your seating position. The receiver
box will need to be connected to the Speedwoofer’s amplifier with the shielded Cate-
gory 5 Ethernet cable we have provided. Simply plug one end into the “Remote Out”
terminal on the back of the box, and the other to the “Remote In” terminal on the
Speedwoofer amplifier (on the back of the Speedwoofer’s enclosure). Just make sure
the cable plugs always click into place. If you prefer a cable of different length or
color, you can find shielded category 5 Ethernet cables at virtually any electronics
store. (In the event that you wish to purchase a different cable, make sure that you
purchase a shielded category 5 or a category 6 Ethernet cable. To minimize the pos-
sibility of interference, we recommend cable lengths that are less than twelve feet.)

It is not uncommon for a quality subwoofer to come with a remote control. Un-

fortunately, the sensors for the remotes are always placed somewhere in the sub-
woofer cabinet itself; rendering the remote completely useless if your subwoofer is
hidden or out of direct sight. Our remote receiver box was designed to be placed in
any convenient location where the remote can easily communicate with it. This way,
you can feel free to hide your RSL Speedwoofer

tm

10 and just place the receiver box

on furniture, shelves, or anywhere the remote can see it. THE REMOTE BOX MUST
BE CONNECTED FOR YOUR SPEEDWOOFER TO OPERATE.

«
...
26
27
28
29
30
...
»

Summary of Contents for CG24 Monitor

















































Reviews:

No comments

Related manuals for CG24 Monitor

Brand: GE Pages: 28

Brand: Bartec Pages: 46

Brand: Mackie Pages: 2

Brand: R.V.R. Elettronica Pages: 38

Brand: Panasonic Pages: 152

Brand: 3M Pages: 90

Brand: CADDX Pages: 6

Brand: MAGICO Pages: 69

MagnaLatch ALERT

Brand: D&D Technologies Pages: 2

Brand: Danfoss Pages: 28

Brand: iHome Pages: 12

Brand: iHome Pages: 2

Brand: VES Pages: 19

Brand: Bigben Pages: 56

Brand: Daewoo Pages: 39

Brand: DLS Pages: 2

Brand: Cyrus Pages: 6

Brand: JLab Audio Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands