RS PART No.:696-1184
OWNER’S MANUAL
HOW TO USE DIGITAL COLOR BOX CAMERA
***NOTE: CS MOUNT LENS & BRACKET ARE NOT
PROVIDED. PLEASE PUT THE DESIRED LENS ON THIS
CAMERA.
-Picture: How to connect CS mount Lens
** Before installing or adjusting please read installation guide
that accompany with this product. Failure to follow
warning notices and instructions may result in property
damage. Improper installation and/or operation will void the
warranty.
Before Using or Installing
Please do not make any attempt to disassemble the camera.
To avoid any electrical shock, Please do not remove camera cover &
screw.
Please consult with Installation specialist since there is no user
execution.
Please do not use strong chemicals or detergent.
Use dry towel to wipe off the camera, to clean off the stain use weak
Cleaning detergent.
Before operation please check the temperature, humidity, and level of
the power.
Please operate camera between temperature levels of -10
℃
~ 50
℃
.
Please do not disclose the camera, if there is lot of smoke or gas.
Please do not disclose the camera under direct sunlight.
Do not aim camera directly at bright object.
By doing so, this action will cause blooming or smear.
Please handle camera with care.
Do not put camera near fire, as this may cause fire.
Please do not hit, or shake the camera.
This could cause camera to malfunction.
Improper care or use of the camera could damage the camera.
Please do not make children handle or operate camera. It may
cause children’s accidents or camera’s malfunction.
.
How to Use &Installations & Warnings
Use of DC12V. ( Please use Adapter 1A for DC12V).
Please use dry towel to clean camera instead of the abrasive.
(This could bring low quality screen view of camera)
Please do not misplace the camera. And prevent any malfunction.
Please do not use camera in humid or wet area.
Do not disclose camera to direct sunlight
Do not expose camera to massive electric wave.
Do not install camera location with lot of vibration.
Do not install product near very high temperature or very low
temperature area. (Please refer to our operation manual on
operation temperature & storage temperature)
Do not attempt to open dome cover after installation and
image adjustment
Production composition & Parts Names
Installation & connection
1)Prepare the desired Lens and fix it. Also connect lens cable in.
2)If possible, using bracket or camera housing for this camera.
And then install this camera at proper position.
3)Connect power cable in.as above picture.
4)Connect Video cable out as above picture.
5)Power on, the power Lamp turns on.
6)To use OSD keys, you can control image condition as you want.
- Please refer following explanation.
Trouble Shooting
If you are not able to view anything from the screen.
Check power, video, strength of signal.
Check monitor input/output.
Check camera connection number with monitor.
For Fuzzy Screen
Check camera lens for dust or dirt. If so wipe them
off with dry towel or brush.
Check cover to see if it’s clean. If so wipe them off with dry towel or
brush.
Check for direct sunlight exposure towards camera.
Check if protection film from camera cover is removed
For Dark Screen
Check for Monitor Brightness.
Unbalanced Black & White on the Monitor.
-Check Monitor
-Adjust the cameras position or angle of lens when screen is bright
If problem still remains please contact our Technical
Support Department.
