EN - 2
The following symbols may appear on the instrument
and in this Instruction Manual :
Risk of electric shock
Refer to Instruction Manual
Direct Current (dc)
Equipment protected throughout by double or reinforced
insulation
Battery
Fuse
Earth
Alternating Current (ac)
Conforms to applicable EU directives
Caution
-
Disconnect the test leads from the test points before changing the
position of the function rotary switch.
-
Never connect the instrument to a source of voltage with the function
rotary switch in
Ω/
;
/
A
/
/
Hz
position.
-
If possible, do not work alone, so assistance can be given if required.
-
Do not expose the instrument to extremes of temperature or high
humidity.
-
Never set the instrument to the
A function to measure the
voltage of a power supply circuit, as it may result in damage to the
instrument and the equipment under test.
Maintenance
Do not attempt to repair this Instrument. It contains no user-serviceable
parts. Repair or servicing should only be performed by qualified person-
nel. This instrument should be calibrated yearly, or more frequently if
used in harsh conditions or if it is suspected of being inaccurate.
For calibration and repair contact RS Components - the address is
given at the end of these instructions.
Cleaning
Periodically wipe the case with a damp cloth and detergent. Do not use
abrasives or solvents.
