RS SAILING RS Zest, Rigging Manual

Page: 13 / 47

11
The jib pack is available as an optional extra. If you do not wish to fit the jib, move
straight on to section 3.7 (Stepping the mast).
a)
b)
Take the jib halyard from the jib pack.
Thread one end of the jib halyard through the metal ring
half way up the front of the mast and pull it through so
that you have two equal tails by the gooseneck.
Secure the jib halyard tails.
3.6 - Rigging the Jib Halyard - OPTIONAL
In order to use the jib, you will need to fit the jib cleats and fairleads to the boat.
See Section 5.1 for how to do this.