20
3.14 - Rudder
To complete this section you will need:
•
The rudder pack
•
A large flat-bladed screw driver
In the rudder pack you will find the rudder, tiller, tiller extension
and two small flathead screws.
Insert the tiller into the stock. Line up the holes,
making sure that the tiller extension joint is on the top of
the tiller
, Then attach using the screws provided.
Attach the tiller extension.
a)
b)
LOCKING GUDGEON
- PUSH TO RELEASE
Summary of Contents for RS Zest
