RS PRO RS-1314, Instruction Manual, Page: 7 / 16

EN-5
(1). LCD Display:
A. Main display: T1, T2 or T1-T2 reading.
B. Secondary display: T1 or T2 reading and MAX, MIN or
AVG reading.
C. Time display: Time display (100-hour clock) shows
elapsed time when MAX, MIN or
AVG is on.
D. Auto power-off mark (:).
(2). H HOLD key: Press H HOLD key to freeze or
unfreeze the display reading.
(3).
Power key: Press
key to turn the meter on or off.
(4). MX/MN key: Press "MX/MN" key to read the maximum,
minimum, and average readings alternately.
Press and hold "MX/MN" key for 2 seconds
to exit MX/MN mode.
(5). T1/T2/T1-T2 key: Press T1/T2/T1-T2 key to toggle
between T1, T2 and T1-T2 in the
main or secondary display.
(6). MEM key: Each press of the "MEM" key stores a single
set of logged data in memory.
(7). SET key:
Press "SET" key to enter alarm setting mode.
Press "SET" key for 2 seconds to exit alarm mode.
(8). Key:
Press or key to increase or decrease the value
for high/low alarm value settings.
Press or key to increase or decrease the READ
mode memory location.