EN-12
To enter ALARM mode, press "SET" key for 2 seconds
then release it. The LCD display will show "ALM" mark.
When the main display measured temperature value is
greater than the setting high temperature value or below
the setting low temperature value, the beeper will sound
continuously.
T1
ALM
C
To exit the ALARM function, press the "SET" key for 2
seconds then release it.
4-6 How to Disable Auto Power-off Function
The meter will automatically turn off if no key press
occurs for 30 minutes.
Press "
" key to turn off the meter.
Press and hold down "
↵
" key then press "
" key to turn
on the meter. The auto power-off function will be
disabled.
The auto power off mark ":" on the time display will not be
visible.
Auto power-off mode is automatically re-enabled each
time the meter is turned on. Auto power off is
automatically disabled in "MX/MN" and continuous data-
logging modes.
Summary of Contents for RS-1314
Page 16: ......