RS PRO RS-1314, Instruction Manual, Page: 13 / 16

EN-11
4-5 Alarm Function Operations
The ALARM function only operates on the main display
temperature value. The resolution of the set value is one
degree and independent of the temperature units.
Press "SET" key once to enter to Alarm High limit value
setting mode. The LCD display will show "ALM Hi" mark.
Hi ALM
Press " " or " " key, until the display shows the
desired alarm high limit values and then press "
↵
" key to
store the high limit value. Repeat to enter the alarm
low limit value setting and the LCD display will show
"ALM Lo" mark.
ALM Lo
Press " " or " " key, until the display shows the desired
alarm Low limit value. Press "
↵
" key to store the Low
limit value and exit the setting mode.