RS PRO ISM 410, Instruction Manual, Page: 19 / 22

Datalogging Solar Power Meter / EN
08/15/16 Version No. 01 16
5-9 Auto Data Memory
1. Clear the auto memorized data only by PC.
2. Interval time setting
Press “
” key to turn on the meter.
Press “READ” key for 3 seconds to set the interval.
Press “ ” or “ ” key to select the desired interval time
from 1 second to 1 minute.
Press “
↵
” key to stored the setting time and exit this
mode.
3. Auto data memory
Press “MEMORY” key for 3 seconds to record data
automatically, LCD then shows “ M ” flickering or “FULL”
mark if memory is full. In this mode, all keys are inactive
except “
” and “MEMORY” keys.
Press “MEMORY” key again to exit.