RS PRO ISM 410, Instruction Manual, Page: 13 / 22

Datalogging Solar Power Meter / EN
08/15/16 Version No. 01 10
5-2 Using the MAX MIN Recording Mode for Solar Power
Measurement
1. Push the “ ” key to turn on the meter.
2.Push “SET” key to select the desired W/m
2
or Btu / (ft
2
x h)
unit.
3. Position the meter with the solar sensor facing the sun
directly.
4. Push “MODE” key for 3 seconds to enter MAX MIN
Recording mode. The maximum, minimum, and average
values are then reset to the present reading, the LCD
displays “MAX” and the auto power off feature is
disabled.
5. Push “MODE” key to select between the display of the
maximum (MAX), minimum (MIN), average (AVG), and
current (MAX MIN AVG) readings. The average reading
is the average of the last 4 measured values.
6. Push “MODE” key for 3 seconds to exit.