3. Replace the fuse with a new one.
4. Put the fuse holder back in place.
Basic troubleshooting guide
WARNING
To avoid personal injury or equipment damage, disconnect the power cord before
making any repairs to the equipment.
Problem 1: The unit has no power / display does not light up.
1. Check if the unit is switched ON.
2. Check the fuse, replace with the same type of fuse if blown.
3. Check the power cord and make sure it is connected.
4. Check if local voltage matches the product requirement.
Problem 2: The temperature of the SMD station is not rising.
Description:
Display lights up but the temperature of heat gun is relative low and
not heating up.
Reason :
Heat gun cord or heating element may be damaged.
Problem 3: Heat gun temperature is intermittent.
Description:
Display lights up but the heat gun temperature increases and
decreases uncontrollably.
The temperature is less than 50
℃
, and no longer heating up when
required.
Reason :
Heat gun cord or heating element may be damaged.
EN-6
