General introduction
Starrsed ST Service manual
Page 17
Version <Book_version> MRN-<MRN_number>-<language_code>
3.1. How to use the Service Manual
In the service manual the following description structure is used to explain an
Assembly
or
Unit.
1.
Assembly
quick reference to Drawings of the assembly.
This section has the main contents to all other sections in this chapter.
All this assembly drawings are collected in a table.
2.
Assembly
general information.
All the information what is useful to know to get a better understanding of the assembly.
3.
Assembly
control with the Menu structure of the software.
In this section all the key functions to control the assembly.
4.
Assembly
error messages.
All the error messages what is caused by a faulty assembly.
1.
Assembly
fault symptoms.
All symptoms what can be caused by a faulty assembly.
5.
Assembly
work instructions.
Instructions for performing often used maintenance procedures.
6. Special tools requirement for this
assembly
.
List of special not common used tools.
7.
Assembly
or
unit
block diagrams.
8.
Assembly
sensor information.
All the information about the sensors in use by the assembly.
1. How to make the proper sensor adjustment.
2.
Assembly
label information.
3.
Assembly
sensor and motor reference.
4.
Assembly
sensor adjustments.
9.
Assembly
hardware replacement.
Only hardware replacement is mentioned in this section, like motors and sensor replacement.
10.
Assembly
hardware adjustment.
When hardware adjustment is required, instructions are mentioned in this section.
11. All trouble shooting on the
assembly.
A combination of the Trouble shooting in the User manual of the instrument and extra trouble
shooting on engineer level.
12. Useful and
previous
information about the
assembly
.
Extra useful and previous information about hardware and adjustments on the
assembly.
13. Applicable drawings from the
assembly
.
