RPSwaterpumps.com
1. Loosen Priming Screw.
2. Create positive pressure in supply line to push
water into pump inlet or fill line with water
3. Once air is completely purged, power on the
pump to purge air completely before fully
tightening Priming Screw again
4. Adjust Pressure Setting with controls. Pump
will adjust speed and smoothly cycle on & off to
maintain desired setting.
BP05, BP1-HP, TPP-HP PRIMING
1. Loosen Priming Screw.
2. Create positive pressure in supply line to push
water into pump inlet or fill line with water
3. Once air is completely purged, power on the
pump to purge air completely before fully
tightening Priming Screw again
4. Adjust Pressure Setting with controls. Pump
will adjust speed and smoothly cycle on & off to
maintain desired setting.
NEW: Wire Priming ‘hook’ in the kit allows
you to reach into the top outlet of the pump
and pull up the small ring on the check
valve so you can pour water in the top and
fill the chamber easily.
PRIMING VIDEO for TP750
http://www.youtube.com/c/RPSSolarPumps
BP1, TP750 PRIMING
Priming
Screw
PRIMING THE PUMP
Summary of Contents for Eco-Steady Booster Pump BP05
Page 2: ...RPSwaterpumps com ...
Page 3: ...RPSwaterpumps com ...
