23
15
Installation of the embeded parts
Placement of the skimfiltre
The Skimfiltre is installed on the metal panel cut out for that purpose.
In order to facilitate transport and placement, Skimfiltre is presented in two parts.
The bottom part n.º 2 is placed after the attachment of the upper wall n.º 1.
To fit the two parts put glue provided with SKIMFILTRE on part n.º 1 and part n.º 2, as shown in the photograph.
ATTENTION:
When applying the two
parts of the Skimfiltre,
make sure that the glue
is properly implemented
and that the n.º 3 output
is directed to the filtration
pump.
Following the correct placement
of the Skimfiltre on the steel panel,
it is fixed with the screws provided,
taking into account existing
perforations, as shown
in the images.
