1
Specifications
•
GSX-R 1300S
•
GSX-R 1300T
•
GSX-R 1350T
•
GSX-R 1340T
•
GSX-R 1400T
•
GSX-R 1500
•
GSX-R 1550T
•
GSX-R 1585T
•
GSX-R 1600T
•
GSX-R 1300 Turbo
•
GSX-R 1615T
•
GSX-R SS 1500
Rated Speed
–
10,500 rpm
Firing Order
–
1, 2, 4, 3.
Cylinder 1 is on the left hand side of the engine (Generator side).
Installation
The engine should be mounted into the chassis by means of four bolts into
the mounting points on each side of the cylinder head and two bars through
the horizontal rear mountings in the crankcases above and below the
gearbox through the rear engine Brace. See next Page for Rear Engine Brace
fitting procedure.
Ensure no looms or hoses are trapped between the engine and chassis.
All sensors should be connected correctly and in working order, including:
•
Air charge temperature
•
Crank Position Sensor
•
Oil pressure
•
Fuel Pressure (if applicable)
•
Coolant temperature
•
Throttle Position Sensor
•
Oil temperature
•
Barometric sensor
•
Cam Phase Sensor (if
applicable)
The oil system must be connected as per the information in this operation
manual. Please read this document carefully, there are different types of oil
system fitted to RPE 4 cylinder engines. Please ensure the correct oil system
is used. There is more information on the various oil systems on pages 2 to 7.
PLEASE BE AWARE THAT FITMENT OF AN INCORRECT OIL
SYSTEM COULD CAUSE AN ENGINE FAILURE AND WILL
INVALIDATE YOUR ENGINE WARRANTY.
The coolant system must be connected and capable of providing adequate
cooling to maintain the correct operating temperatures outlined later in this
document.
Please contact RPE if you have any questions concerning the installation of
your engine. Contact details are listed on page 16.