7
PRODUCT USER SAFETY INSTRUCTIONS
BEFORE INITIAL USE - BE TRAINED
Do not use this product until you have read this manual (additional copies available at www.
rpbsafety.com) and been trained in the use, maintenance, and limitations by a qualified individual
(appointed by your employer) who is knowledgable about the RPB
®
Quiet-Link
™
Ear Defenders.
Allergens
: No known common allergens are used in this product.
Some materials could cause an allergic reaction in susceptible individuals. If you have a known
allergy or develop irritation, inform your employer. Irritation may occur from lack of cleaning.
Following all cleaning and care instructions provided in the instruction manuals for this and any
other RPB
®
products you are using.
ENSURE PROPER FIT
The earmuff must fit snugly without any gaps in order to provide the specified level of noise
reduction. Check the size and fit before use and be aware of how accessories might interfere with
proper fit as discussed below:
When wearing
eyeglasses, goggles, or respirator straps
between the sealing surface of the
earmuffs, noise reduction may be lower. Wear glasses or goggles with thin, flat temples or straps
to reduce the interference with the seal of the earmuff cushions. Make sure long hair is pulled
back as much as possible and remove all items that may interfere with the earmuffs seal around
the ears such as jewelry, pencils/pens, earbuds or hats. Do not bend or reshape the supporting
arm wires as this will reduce the seal of the earmuffs and reduce the noise reduction.
These helmet mounted earmuffs are
medium size
range. Earmuffs complying with EN 352-3 are
of “medium size range”, “small size range” or “large size range”. “Medium size range” helmet
mounted earmuffs will fit the majority of wearers. “Small size range” or “large size range” helmet
mounted earmuffs are designed to fit wearers for whom “medium size range” earmuffs are not
suitable. The RPB
®
Quiet-Link
™
Ear Defenders are only available in medium size. Consult your
employer if you feel these earmuffs do not fit properly.
The fitting of
hygiene covers
to the cushions may affect the acoustic performance of the earmuffs.
Be aware that the hearing protection provided may be reduced.
MAKE SURE THE SYSTEM IS READY FOR USE
Make sure you have a complete system
. Verify that you have all required components for the
Quiet-Link
™
to provide appropriate hearing protection.
See the instructions in this manual for installation and maintenance instructions. Use only
authentic RPB
®
brand parts and components. Using incomplete or inappropriate equipment,
including the use of counterfeit or non-RPB
®
parts, can result in inadequate protection. Do not
modify or alter any part of this product.
Inspect
all components daily for signs of damage or wear and tear that may reduce the level
of protection originally provided. Remove any damaged component or product, including any
Quiet-Link
™
Ear Defenders or respirator that has been subject to impact, from service until
