12
PX5 PAPR
®
To remove the battery from the charging
station, grip the charger housing firmly if
not fixed in place, pull up on the tab on the
bottom of the battery and slide the battery
from the charger housing.
Follow the indicator lights on the top right
corner of the charging station to know the
status of the charge process. 1 blinking LED
= low charge. 2 blinking LEDs = medium
charge, 3 blinking LEDs = high charge, 3
solid LEDs = fully charged, approx. 95-100%
charged.
FIGURE 2.3
FIGURE 2.4
Fit the battery into the charging station by
sliding the top of the battery into the charger
housing and then rotate the battery down
until it clicks into place.
Connect the power cord to the charging
station. Connect the other end of the power
cord to the electrical source (110-240v).
CHARGING THE BATTERY PACK
FIGURE 2.1
FIGURE 2.2
1. 2.
3.
RESPIRATOR SETUP AND CARE
CONTINUED
Summary of Contents for PX5 PAPR
Page 31: ...31 NOTES...