background image

4

PX4 AIR

®

RESPIRATION

The RPB

®

 PX4 AIR

®

 is approved in the categories as follows:

Powered Air

The RPB

®

 PX4 AIR

®

 PAPR, when properly fitted and used with all required components, 

including the Breathing Tube Assembly and the approved head top, is part of an approved 
powered air purifying respirator. As such, it significantly reduces, but does not completely 
eliminate, the breathing of contaminates by the respirator wearer. See the instruction manual 
and approval label for the selected head top to verify approval with the PX4 AIR

®

and the 

assigned protection factor. Specific protection depends on the filter selected for use in the 
RPB

®

 PX4 AIR

®

 PAPR. It is approved to be used with the 03-985 High Efficiency (HE) Filter 

and the 03-995 Organic Vapor/High Efficiency (OV/HE) Cartridge.

The PX4 AIR

®

 is approved to the following standards with the following head-tops:

 EN 12941: 1998 + A1: 2003 + A2: 2008 TH3

 Nova 3

®

 Respirator

 EN 12941: 1998 + A1: 2003 + A2: 2008 TH2

 Z-LINK

®

 Respirator

 T-LINK

®

 Respirator

 Z4

®

 Welding Respirator

Note: the EN 12941: 1998 + A1: 2003 + A2: 2008 standard is a requirement for loose fitting 
respirators such as helmets and face shields.

PROTECTION PROVIDED AND LIMITATIONS

Improper selection, fit, use, or maintenance of this product can result in 
injury; life threatening delayed lung, skin or eye disease; or death. 

This product is intended for occupational use in accordance with applicable standards or 
regulations for your location, industry, and activity (see Employer Responsibilities, page 7). 
Familiarity with standards and regulations related to the use of this protective equipment 
is recommended, even if they do not directly apply to you. If self-employed or if used in a 
nonoccupational setting, refer to Employer Responsibilities and Product User Safety Instructions. 
Go to rpbsafety.com/importantsafetyinformation/ for helpful links to CE standards and other 
content.

Employers: 

Read this manual and the respirator head-top Instruction Manual and carry out the 

Employer Responsibilities (page 7).   

Product users:

  Read this manual and the respirator head-top Instruction Manual and follow the 

Product User Safety Instructions (page 9).

Check website for updates.

 Product manuals are regularly updated. 

Visit www.rpbsafety.com/resources/for the most recent version of this manual before using the 
product.

IMPORTANT SAFETY INFORMATION

WARNING

Summary of Contents for PX4 Air

































Reviews: