Mask Fan
Instruction Manual
Type-C
charging port
Type-C to
Type-C charging
cable
Connect to
power source
03
Use the DivinAir Mask or any other facial mask that
will fit with the mask fan. Remove the magnetic mask
fan cover ring and place it in the inside of your facial
mask (either left or right side). Place the main mask
fan outside of the facial mask over the magnetic fan
cover ring to clamp between the facial mask fabric.
They should magnetically snap to place.
Long press the power button for 1 second to turn on
the fan. With each short press, the fan will change
speeds from low, medium to high. Short press will
cycle the fan speed and long press for 1 second to
turn off the fan. The mask fan will have a memory of
the fan speed when turned off. When you turn it back
on it will remember the last fan speed you used.
How To Use:
1
2
Inside
of mask
Magnetic
fan cover
ring
Outside of mask
01
Clean Cool Air Through Your Mask
Easily attaches to almost any face mask and provides
refreshing ventilated air.
Please Note Before Use:
While the mask fan will attach to most facial masks, it
may not fit with preformed masks with a fixed shape.
Please test on your mask before use.
What’s Included:
• Mask Fan
• Replaceable Nano Silver Coated Filter
(Pre-installed in mask fan)
• Type-C to Type-C Charging Cable
• Retainer Strap
• Instruction Manual
02
Charging Your Mask Fan:
Lift the protective silicone cover on the mask fan Type-C charging port.
Plug the included charging cable into the mask fan and then connect to
a power source. When charging the LED indicator will be solid RED.
When fully charged the LED indicator light will be off.
