≥1,5%
≥
1 mm
Installation Requirements
kurai
GB
x
2
x
1. Create an even support surface for the whole dimension
using a levelling mortar and leave it to set for the amount
of time indicated by the manufacturer.
Ensure that the falling water and pipes are not aligned
so that drainage capacity is not lost.
During installation of the pipes, ensure that the drainpipe
is inclined equal to or greater than 1.5% to facilitate drainage
and that it is placed 1mm or more from the floor.
350
350
Hole for the
drain.
350
350
350
350
x y
x
min
250mm
y
-06-
200
1000
250
1200
300
1400
600
1600/1800/2000
