press UP key to select the tire (for example
F01
) which will be
exchanged the position, then press DOWN key to select the second tire (
for
example
F03
)
which
will
exchange its position with the first
one and press Enter key to conduct
the exchange. If there is other tires
positi on exchange, do as the
above.Press Enter key to exit the
function when
END
is displayed.
9. Standard pressure setting
The pre-set standard pressure is 2.4Bar. Keep on press DOWN key for
3 seconds to let
SET
be displayed, then press Enter to make 'P-B
be displayed. If
E-P
is displayed by pressing UP key, press Enter
key with front tires icons and previous set value (like 2.4Bar) displayed,
press UP key to make the figure increase while DOWN key decrease,
OPERATION
OPERATION
by UP key and make the new one send out RF signal, sensor's ID (like
E6 5A
-- on the ID card) will be displayed after the receiver received
the information, then press Enter key to accept it with
---
displayed.
After that, press UP key till
END
displayed and press Enter key to
finish setting up.
8. Exchange tires position
Press DOWN key for 3 seconds and
SET
will be displayed, then press
Enter key and
P-B
be displayed. If
S-P
is displayed by pressing
UP key, press Enter key with right front tire icon and
F01
displayed,
10
11