f) No signal
: the buzzer
and yellow LED is
on; the value of pressure and temperature, the tire icon of the
transmitter are displayed and the icon of no signal is
flashing; the buzzer will stop buzzing if any key
pressed. the
warning
turns on for 2 beeps
warning
is
Note:
Only if the well inflated tire icon is displayed with green LED on,
warning message of each tire will be displayed in turn if more than
one tire is under abnormal condition
it means no warning.
The warning or
messages are displayed
in turn if there are more
than one transmitter are
u n d e r
a b n o r m a l
condition.
warning
6. Manual reading
The warning message can be displayed automatically when any tire is
under abnormal condition. Enter key will select the tire to display its
information.
OPERATION
7. Set up a transmitter
Press the DOWN key for 3 seconds,
SET
will be displayed, then
press the Enter key to enter next step. When
P-B
is displayed ,
press the UP key to make
L-C
displayed, then press Enter key to
select right front tire and
F01
displayed. Select the tire to be set up
The warning message of each tire will be displayed in turn if more than
one tire is under abnormal condition.
e) Low power of transmitter
: the buzzer
and
yellow LED is on; the value of pressure and temperature, the tire icon
of the
transmitter are displayed and the icon of low power is
flashing; the buzzer will stop buzzing if any key
pressed. The
warning message of each tire will be displayed in turn if more than one
tire is under abnormal condition.
warning
turns on for 6 beeps
warning
is
OPERATION
08
09