5
Start-Up for RFG-2000 (RS-232 & USB)
Getting Started
Step 1: Plug-in RS-232 or USB cable to your laptop or desktop PC.
Step 2:Install USB driver if you use USB cable to connect RFG-2000 to your
PC.(for detail, please go to
USB driver installation for Windows
Operation System
)
Step 3:Choose the correct COM port and baud rate (4800bps) for map or
navigation software.
Step 4: Place your Onyx on the outside roof of your vehicle with magnetic
base if you encounter any problem to receive GPS signal.
Notice:
(1) For safety reason, please do not install RFG-2000 while driving.
(2) The formats of NMEA messages are illustrated on
Software Data
section.
RS-232
PS2