Royal 210DX Instruction Manual Download | Manualshive

Page: 45 / 55

background image

41

"X" AND "Z" SALES MANAGEMENT REPORTS

Transaction data is maintained in the memory of the cash register as long as the battery back-up system is in effect. This data
can be printed as a report for management review.

The Management Report can be printed from either the "X" or the "Z" position on the Control Switch.

"X" POSITION REPORT

(Refers to a mid-day reading)

The "X" position report prints the accumulated information and RETAINS ALL TOTALS IN MEMORY. Use this position to print
periodic readings of transaction information at any time through-out the day. (Some users call the X-report a mid-day report).

"Z" POSITION REPORT

(Refers to an end-of-day or close-out reading)

The "Z" position report prints the same information as the "X" report. However, once this report is printed, ALL TRANSACTION
TOTALS ARE RESET TO ZERO except the Grand Total. (Some users call the Z-report an end-of-day report).

NOTE: To prevent accidental printing of the "Z" report, set the security code as explained in the SECURITY CODE section.
Once this code is set, a "Z" report will not print until the security code is entered. If a "Z" report is attempted without entering the
security code, the prompt "SEC Code" will appear in the display.

PRINTING THE SALES REPORT

IMPORTANT: Once a "Z" reading is taken, it cannot be duplicated, so be sure to have plenty of paper in the register.

1.

Set the Control Switch to either the "X" or "Z" position.

2.

Press the

[amt tend/TOTAL]

key.

NOTE: If a security code has been assigned, be sure to enter the security code before pressing the

[amt tend/TOTAL]

key.

TO CLEAR THE GRAND TOTAL:

1. Set the Control Switch to the "PRG" (Program Mode) position.

2. Type

[2]

, type

[0]

, then press

[R/A]

.

After this operation, the grand total resets to zero.

ZERO-SKIP REPORTING

Please note that this model cash register has an automatic zero-skip feature activated for the financial reports.  This means that
items  with  a  zero  balance  or  no  transactions  for  the  time  period  covered  by  that  report  (no  history)  will  be  skipped  and  not
printed on the report.  This feature helps save paper instead of printing all the items with a zero in the amount column.

For example, if there were no sales in Dept. 2 for the entire day, and there were a total of $100 sales in Dept. 1 and $50 in sales
in Dept. 3, then the Z-report at the end of the day will print Dept. 1 with $100 in sales and Dept. 3 with $50 in sales. Dept. 2 will
be skipped completely on the report.

So, if you run a financial report and notice certain Departments or

PLU’s missing, then it means that there were no sales or

transactions for the missing item during the time period covered by that report.

This feature is automatic and there is nothing you need to do to turn it on. There is no way to disable this feature.

«
...
43
44
45
46
47
...
»

Summary of Contents for 210DX
























































Reviews:

No comments

Related manuals for 210DX

Brand: Nautilus Hyosung Pages: 30

Brand: UNISource Corporation Pages: 22

Brand: Casio Pages: 10

Brand: Scan Coin Pages: 12

Brand: Scan Coin Pages: 46

Brand: Precision Digital Corporation Pages: 98

Brand: Olivetti Pages: 65

Brand: TEC Pages: 72

Brand: TEC Pages: 144

Brand: TEC Pages: 120

Brand: Lindgren-Pitman Pages: 2

Brand: Rion Pages: 72

Brand: MZ electronic Pages: 76

Brand: MZ electronic Pages: 120

Brand: Fri-Jado Pages: 105

Brand: Fri-Jado Pages: 126

Brand: DIEBOLD NIXDORF Pages: 58

Brand: DIEBOLD NIXDORF Pages: 60

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands