RSC-820CL
9
8. USING FOOT PEDAL
USING FOOT PEDAL
Place the foot pedal on the floor in front of the
machine. Once all correct settings are displayed,
you may use the foot pedal to operate the laminator
for “Hands Free Operation.” To activate the machine,
press the foot pedal once and then release. Repeat
to stop the rollers.
9. LOADING FILM
The cross cutter is located on the rear exit table of the machine.
1. After lamination, move the cutter approximately to the
center of the completed application at the desired
point of detachment (Figure 1).
2. Grasp film with one hand, press the cutter
downward into the application and slide it first to
one end of the application, then to the other end to
complete the cut (Figure 2 & 3).
Figure 1
Figure 2
Figure 3