12
Figure 7
Figure 8
17. Press the Stop button when the leader board has completely exited from the rollers.
18. Use the Cross Cutter to cut the leader board from the web (see page 9).
19. Set the nip setting to the appropriate position for the Over-lamination/Decaling
application.
11. Reinstall the Feed Table and close the Safety Cover.
12. Adjust the nip setting to appropriate gap.
13. Insert and push the leader board until they reach the
front nip point.
14. Push the Run button.
15. Push the leader board into the rollers. (Figure 7)
16. Adjust the top and bottom tension knob by rotating it clockwise
or counterclockwise. Turn it until the top and bottom roll films
have some resistance (The tension varies depending on the
film thickness; the thicker the film the more tension is required).
(Figure 8)
