8
How to drain out the water from the internal tank and big water reservoir completely:
If you want to drain all the water in the big water reservoir, plug in the unit without starting it, then remove the drain port
cap at the back. Wait a few minutes until all of the water is drained out.
CONNECT YOUR ICE MAKER TO WATER SUPPLY
Important:
Direct water connection should be done by a licensed plumber. Be sure to use the new hose-sets supplied
with this unit to connect to water mains.
1. Connect the water hose to the unit:
i) Remove the clip on the water inlet by pushing the anti-dust plug inwards. Remove the anti-dusty plug
ii) Insert one end of the white water hose into the water inlet port. Push inward completely and re-install the clip.
2. Connect the water hose to the water faucet or valve of the water supply system
i) Install the supplied water quick-connector to the water faucet by screw thread
ii) Remove the clip from the water quick connector
iii) Insert the other end of the water hose completely into this quick-connector port
iv) Re-install the clip.
Note:
The water supply faucet/valve is not included.
i) Remove the anti-dusty cap
ii) insert the water hose
Then install back the clip
White water hose
First insert water hose inward
completely
Water inlet port
Remove the
clip first
Then remove the
anti-dust cap
