RBC-4500-CA
13
eRRoR CoDe DISPlAY
After start, the machine will go on self-check automatically. If preset window show the following error code, generally speaking, it is
because of dust on the surface or sensor blocked by notes. So please clear the dust on the surface of sensor with brush or soft cloth, or
take the notes away. Then restart the machine.
error code
Trouble position
UV CHECK FAIL
UV sensor
NL CHECK FAIL
Left counting sensor
NR CHECK FAIL
Right counting sensor
NC CHECK FAIL
Middle couting sensor
IRL CHECK FAIL
Left double-notes sensor
IRR CHECK FAIL
Right double-notes sensor
STACK CHECK FAIL
Note-receiving sensor
HOPPER CHECK FAIL
Note-feeding sensor
ENCODE disc CHECK FAIL
Width sensor
During counting, if error code appears and the machine stops, please solve it referring to the following methods according to what displays.
error code
Reason and trouble shooting
HALF
Half sheet. Eliminate the note. Press “reset” and count continuously.
DOUBLE
Double-notes. Put the notes( from stacker) onto the note-feeding table again, press “reset” key to count again. If DOUBLE often
appears, please adjust the position of adjustment knob referring to “Confirm the position of note thickness adjustment knob”.
CHAIN
Jointed notes. Put the notes from stacker onto note-feeding table again, press “reset” key to count again.
JAM
Jammed notes. Turn off the machine, turn the note-feeding wheel by hand, and take out the note from the machine.
NARROW
Place the money back on to the Bill Counter Hopper. Press the ‘Reset’ key to count again. If the NARROW button reappears, please
adjust the adjustable bill guild/ bill thickness adjuster clockwise (turn right to ‘ +’)
UV, MG, DD
Fake note or questionable note. Eliminate this note, press “reset” and count continuously.
