6
PRODUCT OPERATION
1.
Attach power cable to back of machine, plug into a three prong outlet, and turn power switch on.
-
The unit will conduct an automatic self-diagnostic test to ensure accurate counts.
-
After five seconds
of the counting wheels spinning
, the screen will display a "0".
-
If there is a problem, the preset display will show an error code. (See ERROR CODE DISPLAYS
-LOCATED ON PAGE 1
0.
)
2.
Select bill counting settings:
Before counting, select counting settings that are related to your counting
needs:
-
ADD mode:
The ADD mode displays the cumulative total of all bills counted. To turn ADD mode on, press "ADD".
-
BATCH mode:
The machine is preset to common counting mode, which automatically counts all bills placed into the
hopper. To count bills in batches, press the BATCH key. Batching is preset to 100 bills. To change
batch
amount, press C to clear, and use the keypad to enter a batch number between 1 and 999.
Under the batch counting mode, once the hopper is loaded, the machine will start counting and will
stop when the counted quantity reaches the preset batch quantity. To repeat the batch counting
operation under the same preset batch quantity,
simply
remove the counted banknotes from the
stacker. The machine will batch the next group of banknotes under the same settings. If you wish to
keep batching without removing the banknotes from the stacker, press the
“START” button.
