Place laminator on a sturdy, flat work surface. Allow ample clearence behind laminator
for laminated document or photograph to exit completely without bending.
Connect laminator to an electrical outlet that matches laminator's rated voltage and
power requirements.
If an extension cord is required, use a cord rated higher than the laminator's capacity.
DC FAN
Voltage / Cycle
11Kg (24 lbs.)
AC 100V 50/60Hz, AC 120V 60Hz , AC 220-240V 50/60Hz
AC MOTOR
520mm (20.5") per min.
Power Consumption
Temp. Operating Range
Film thickness
Transport Type
Weight
Cooling Fan Type
Motor Type
Max. Laminating Speed
SETUP
1000W
Max.Laminating Thickness
445mm (17.5")
8 SETTINGS
4~5 min
Four Roller (no carrier)
Hot roller
Description
NB - 1900N
680x225x127mm (26.8"x10"x5")
SPECIFICATIONS
Dimensions(w x d x h)
Max.Laminating Width
Heat Source
Pre-Heating Time
2mm (1/12")
75~250mic(3~10 mil)
5
EDNord - Istedgade 37A - 9000 Aalborg - Telefon 9633 3500