3.INSTRUCTION OF BUTTONS AND LED
1. Press power button to turn laminator on or off.
2. When you press power button, "FUNC 2"
LED is blinking. At this time, function
buttons become available.
3. To choose film thickness, press
or
and you will see
the LED read-out.
4. For cold laminating, press
then green LED will light up.
5. When you choose any function, a blinking LED light
means it's not ready. When the blinking stops, the
laminator is ready.
6. When blinking stops, a buzzer will ring once
every two minutes.
7. Even if you turn off as soon as finishing laminating,
rollers will continue to turn until cooled
down properly, and then stop.
COLD
COLD
ON/OFF
NB-1900N
8
EDNord - Istedgade 37A - 9000 Aalborg - Telefon 9633 3500
