(Instructions continued on opposite
side).
1. Set slitters to “Film Set Position.”
5. Manually push 2 sheets of
11”x17” chipboard through.
Keep pushing until the chipboard
starts to exit the machine.
3.
Open rollers (rotate lever on
side of machine to “Open”).
Remove old film.
Remove bar (push to one side
and lift out).
Open rollers
Remove bar
2. Remove film roll tension.
Unscrew
4.
Insert new film rolls (black line
on roll to black dot on
tensioner).
Overlap film onto heat rollers to
seal film together.
Re-install bar (reverse of
removal; route film behind bar).
Re-install bar
Overlap and
seal film
Automatic Laminator Film Threading Instructions
Be sure to follow these steps before running the machine!
For a complete video tutorial, scan code or visit:
www.saddlepointsystems.com/resources/video-demonstrations/fujipla
