6
InStallatIon
Unpack your New Portable Air Conditioner and let the machine stand upright for 2 hours before starting.
Unpack all parts listed below. If any parts are missing do not return this product to the place of purchase.
Please visit our website www.royalsovereign.com and click on the “Support” tab .
Part 1: Attaching exhaust hose
1.∙Extend∙one∙end∙of∙the∙exhaust∙hose.
2.∙Take∙the∙hose∙connector∙and∙twist∙it∙counterclockwise∙onto∙one∙end∙of∙the∙exhaust∙hose.
3.∙Extend∙the∙opposite∙end∙of∙the∙exhaust∙hose.
4.∙Take∙the∙hose∙adapter∙and∙twist∙it∙counterclockwise∙onto∙the∙unused∙end∙of∙the∙exhaust∙hose.
Part 2: Attaching exhaust hose
1.∙Hold∙the∙exhaust∙hose∙parallel∙to∙the∙floor∙with∙the∙hose∙connector∙positioned∙Left∙to∙Right.∙
2. First insert the long tab into the left side of the Air outlet. Then push the tabs on the right side
of the air outlet down into the tabs connected to the unit.
part 3: Installing window slider kit
1. Open the window and place the window slider on the inside edge of the window.
2. Adjust the window slider to the width of the window.
3. Insert a screw into the top of the window slider to secure it at the correct length.
4.∙∙Take∙window∙slider∙out∙and∙attach∙to∙exhaust∙hose∙by∙snapping∙the∙hose∙adapter∙into∙
the hole on the window slider. Make sure that the tabs on the window slider are
facing outside.
5.∙Extend∙exhaust∙hose∙to∙desired∙length.
6. Place window slider and hose into the edge of the window.
7. Close window to secure slider.
Fig 1.
Fig 3.
Fig 2.
