aRp-1314
11
Remote control
For∙first∙use:∙∙Remove∙the∙plastic∙from∙between∙the∙battery∙and∙the∙contacts.
To∙use:∙aim∙remote∙control∙at∙the∙sensor∙on∙the∙control∙panel
on/oFF
:∙Press∙to∙turn∙the∙unit∙on∙or∙off
Mode
:∙Press∙to∙choose∙operation∙mode:∙Auto∙
Cool
Dehumidify
Fan
Fan Speed
:∙Press∙to∙choose∙between∙Auto∙
∙Low∙
Med
High fan speed
/
teMp
:∙Press∙up∙or∙down∙to∙control∙room∙temperature∙or∙timer∙hours
econoMY
:∙Press∙to∙set∙or∙cancel∙sleep∙mode∙operation
tIMeR on/oFF
:∙Press∙to∙set∙unit∙to∙automatically∙turn∙off∙or∙on∙with∙a∙timer
led display
:∙∙Press∙this∙button∙to∙clear∙the∙display∙on∙the∙indoor∙unit,∙press∙it∙again∙to∙light∙the∙display.
SwInG
:∙Used∙to∙stop∙or∙start∙louver∙movement∙and∙set∙the∙desired∙up/down∙airflow∙direction.
ReSet
:∙∙Once∙the∙recessed∙RESET∙button∙is∙pressed,∙all∙of∙the∙current∙settings∙will∙be∙cancelled∙and∙the∙controller∙will∙return∙to∙the∙initial∙settings.
locK
:∙∙Press∙this∙recessed∙button∙to∙lock∙all∙current∙settings,∙and∙the∙remote∙controller∙will∙not∙accept∙any∙operation∙except∙that∙of∙the∙LOCK.∙
Use∙the∙LOCK∙mode∙when∙you∙want∙to∙prevent∙settings∙from∙being∙changed∙accidentally.∙
Press∙the∙LOCK∙button∙again∙to∙cancel∙the∙LOCK∙function.∙A∙lock∙symbol∙will∙appear∙on∙
the remote controller display when the lock function is activated.
Remote control battery Installation
The remote controller is powered by two dry batteries housed in the rear part and protected by a cover.
1. Remove the cover by pressing and sliding off.
2.∙∙Remove∙the∙old∙batteries∙and∙insert∙the∙new∙batteries,∙placing∙the(+)∙and∙(-)∙ends∙correctly.
3. Reattach the cover by sliding it back into position.
note:
When the batteries are removed, the remote controller erases all programming.
After inserting new batteries, the remote controller must be reprogrammed.
