www.doulton.com
13. Changing the battery – see figure 11
When the ceramic filter has been changed the Pillar Tap indicator light will
need to be re-set. To re-set the indicator light, follow the steps below.
13.1 Remove the battery holder by pulling out from the underside of the pillar
tap operating lever
13.2 Remove the battery
13.3 Re fit a new CR 2032 3V battery. The LED light on the circuit board will
flash red then blue
13.4 Push the battery holder into the underside of the pillar tap operating lever,
ensure the light on the circuit board aligns with the light lens. The indicator
light is now re-set for use with the new ceramic filter, when the pillar tap is
operated the indicator light flashes ‘blue’
Parts and Service Availability - Buy online at
www.doulton.com
Product Warranty - Your filter housing is covered under warranty for 12 months
from the purchase date of the product against any failure due to defect of
materials, workmanship or design of the filter housing. Please retain your receipt
as proof of purchase. To register your product warranty please visit www.doulton.
com/product-registration/ and complete the Product Registration Form.
Extended Product Warranty via the Doulton App
Download the Doulton
®
App and register your filter housing for a further
12 months free product warranty. The App can also be used to check the service
life remaining on your ceramic filter, remind you when it is time to replace and
allow you to easily order replacement filters.
Figure 11
Install battery, red light will
flash, followed by a blue light
Reverse of battery
Insert battery as
shown
Battery holder
