Threading
4
3
1
2
1
Threading / Preparation
•
Disconnect machine
from electricity supply.
•
support rod with thread
guide must be fully raised.
•
Open the looper cover and
the cloth plate cover.
•
turn the hand wheel towards
you until needles are fully
raised.
Always thread the machine in
the correct sequence !
Upper looper (1-green)
•
place the spool on
the spool holder pin.
•
Bring thread up from back to
front through guide (1).
•
pull the thread under the
guider (2) up to go around
the pre-tension (3). the thread
now s-loops through the two-
holes in the thread guide bar.
•
thread guide (4,5,6).
•
thread looper eye (7).
4
6
5
3
2
1
7
8
E
N
g
Li
S
h
