inserting needles
- switch the machine off ”O”.
Disconnect machine from electric-
ity supply.
- turn the hand wheel until needles
are fully raised.
- lower the presser foot.
- use the hexagon wrench to
loosen the needle setscrew. re-
move needle.
- insert the needle flat side towards
the back, as far as possible into the
needle clamp. tighten the screw.
- the left needle is set higher than
the right needle.
Raising the upper knife
- turn the hand wheel to raise the
needles.
- Open the looper cover.
- press the upper knife holder to
the right. turn the knob clockwise
until the knife engages. - Close the
looper cover.
To lower the upper knife
- turn the knob anti-clockwise. the
knife snaps automatically into its
lower position. Close the looper
cover.
Using the machine
A
B
A
B
7
E
N
g
LiS
h
