f)
Repairs and maintenance should be carried out by qualified personnel using
only original spare parts. This will ensure the safety of use.
g)
To ensure the designed operational integrity of the unit, do not remove
factory-installed covers or loosen screws.
h)
When transporting or moving the unit from storage to the place of use,
observe the health and safety rules for manual handling applicable in the
country where the unit is used.
i)
Do not move, shift, or rotate the unit while in operation.
j)
Clean the unit regularly to prevent permanent dirt build-up.
k)
The unit is not a toy. Cleaning and maintenance must not be performed by
children without adult supervision.
l)
Do not tamper with the unit to alter its performance or design.
m)
Keep the unit away from sources of fire and heat.
n)
Do not block the ventilation openings of the unit!
o)
Ensure that the power supply to the unit corresponds to that specified on the
identification plate!
p)
The unit must be connected directly to a wall plug socket.
q)
After delivery of the unit, wait 8 hours for the refrigerant used inside the unit
to stabilize before connecting to the mains.
r)
Do not install the unit close to equipment generating high temperatures/heat
(heaters, boilers) and do not install the unit in direct sunlight!
s)
Do not damage the refrigerant circuit.
t)
Do not allow the rear coils of the unit to come into contact with the wall surface.
u)
CAUTION! The unit in its construction contains flammable substances! If the
unit is damaged, avoid contact with open flames, as well as the room in which
the instrumentation is located should be thoroughly ventilated!
v)
Do not place the unit in the vicinity of flammable materials such as paper or
other materials.
w)
Do not place heavy objects on the unit.
x)
There is a risk of children getting stuck inside the unit. Before storing the end-
of-life unit, cut off the wiring at the back of the unit and disable the door lock
so that children cannot get stuck inside the unit.
y)
The unit is not designed to freeze food products.
z)
The factory set shelves provide the most efficient use of energy by refrigeration
equipment.
aa)
Do not use electrical appliances inside the refrigerator other than those
provided by the manufacturer.
bb)
Do not operate the unit in unheated areas.
cc)
Do not open the door to the unit too often or leave it open for long periods of
time. This results in increased electricity consumption, which can lead to
possible damage to the unit.
dd)
If the refrigeration unit remains unfilled for a long time, turn it off. Defrost,
clean, dry and leave the door open to prevent mold growth inside the unit.
Summary of Contents for RCWI-4G
Page 1: ...expondo com WINE COOLER USER MANUAL Instrukcja obs ugi...
Page 12: ......
Page 30: ......