2.4.
Safe use of the unit
a)
Do not overload the unit. Use tools that are suitable for the application. A
correctly selected appliance will do a better and safer job for which it was
designed.
b)
Do not use the appliance if the ON/OFF switch does not function properly
(does not turn on and off). Devices that cannot be controlled by the switch are
unsafe, cannot operate, and must be repaired.
c)
Disconnect the unit from the power supply before adjusting, cleaning, or
servicing. This precaution reduces the risk of accidental start-up.
d)
Keep unused equipment out of the reach of children and out of the reach of
anyone unfamiliar with the unit or this instruction manual. These units is
dangerous in the hands of inexperienced users.
e)
Keep the unit in good working condition. Check before each use for general
damage or damage to moving parts (cracks in parts and components or any
other condition that may affect the safe operation of the unit). If damaged,
have the unit repaired before use.
f)
Keep the unit out of the reach of children.
g)
Repairs and maintenance should be carried out by qualified personnel using
only original spare parts. This will ensure the safety of use.
h)
To ensure the designed operational integrity of the unit, do not remove
factory-installed covers or loosen screws.
i)
When transporting or moving the appliance from storage to the place of use,
observe the health and safety rules for manual handling applicable in the
country where the appliance is used.
j)
Avoid situations in which the machine stops under heavy loads during
operation. This can cause overheating of the drive elements and consequent
damage to the equipment.
k)
Do not touch any moving parts or accessories unless the appliance is
unplugged.
l)
Do not move, shift, or rotate the machine while in operation.
m)
Do not leave the appliance switched on unattended.
n)
Clean the unit regularly to prevent permanent dirt build-up.
o)
The unit is not a toy. Cleaning and maintenance must not be performed by
children without adult supervision.
p)
Do not tamper with the unit to alter its performance or design.
q)
Keep the unit away from sources of fire and heat.
r)
Do not overload the unit.
s)
Do not block the ventilation openings of the appliance!
t)
Before starting the appliance, make sure that all moving parts are securely
fastened in their bases.
u)
The appliance is intended for food processing only.
v)
Do not use the machine without the bowl cover in place.
w)
Do not mix hard and deep frozen products as this may damage the machine.
