25mm
Small tab
to door.
Large tab to Front
panel frame.
Front panel
32mm
19mm
50mm
50mm
Back panel
Side panel
Panel frames
rest on floor.
Panel cladding
overhangs floor
edge.
Back panel
Front panel
Side panel
Side panel
Drill
Drill pilot
holes for the
window
screws.
2. Door panel
Attach the three small tabs of the hinge to the door as shown using 2 x 25mm screws per tab. Open the hinge and secure the large tab to the door frame using 5 x 25mm
screws per tab as shown below. Put the window into place on the front panel, Secure into place using 4 x 32mm. Screw through the side of the window frame into the
framework of the front panel. Secure the door handle using 4 x 19mm black roundhead screws as shown below. The magnetic catch is fitted to the front panel framing
just inside the door, the catch plate is fitted to the door. Position them so that when the door is shut the two parts clip together. Once in position fix the magnetic catch
to the panel frame using 2 x 19mm round head screws and the catch plate to the inside of the door using 2 x 12mm screws.
4. Walls to floor
Ensure the panels are sitting square on the floor. Secure using 2 x 50mm screws per panel, screw through the panel frame, through the floor and into the floor bearers.
50mm
50mm
50mm
Floor bearers
Floor
Panel frames
Side panel
Back panel
3. Wall panels
Position the back panel and the side panel as shown. Note how the panel frames sit on the floor with the panel cladding overhanging the floor edge. Ensure square and secure
using 2 x 50mm screws through the frame of the side panel into the frame of the back panel. Fit the side window frame into the window side panel using 4x32mm screws
secure in the same way as the front window in the front panel. Continue by attaching the window side panel to the back panel and then add the door panel in the same way.
Drill
Drill pilot holes for
these screws.
Door
Front panel
19mm
12mm
1. Floor section
Prepare a level area for the playhouse to sit. Attach four treated wooden or similar bearers of size 50 x 50 x 1468mm to the floor (Not supplied in kit). Attach two treated
wooden or similar bearers of size 50 x 50 x 1473mm to the bottom of the veranda floor (Not supplied in kit).
To "
VALIDATE
" the guarantee, this item should be erected on
50mm x 50mm treated wooden or similar bearers
(These are
not supplied with the kit.)
Ground contact must be avoided.
The side window is fitted
and secured in the same
way as the front window is
fitted to the front panel.
