30/44
1. Put the main body up-side-down (Fig. 1a).
Slide Deco. Board (Nr. 6) onto Base Bracket
(Nr. 5). Put the plug (Nr. 8) and power
supply cord through the holes on the center
of Base Cover (Nr. 4) and Base (Nr. 3).
Then slide Base Cover (Nr. 4) , Base (Nr. 3)
and Washer (Nr. 2) onto Base Bracket (Nr.
5) respectively.
2. Fix Washer (Nr. 2), Base (Nr. 3), Base
Cover (Nr. 4) and Base Bracket (Nr. 5) with
Screw M6*20 (Nr. 1).
Clip the power supply cord with Cord Clip
(Nr. 7) and fix it onto Base (Nr. 3) with
Screw (Nr. 9).
3. Stand the unit correctly (Fig. 1c). Fix L
Bracket (Nr. 11) onto Alum. Fixtures (Nr.
10) with Screw M8*6 (Nr. 12) & M4*6
(Nr. 13) respectively. Then slide L Bracket
(Nr. 11) into the holes of Control Box (Nr.
14).
4. Fix L Bracket (Nr. 11) onto Control Box
(Nr. 11) with Screw M6*16 (Nr. 15).
GB
