5
GB
PUTTING THE FILTER IN PLACE
When using later or replacing the cartridge : Select the "FILTER" function using the Prog button :
:
Maintenance -OK - Filter - OK - Place or change -OK - and follow the instructions on the screen.
To prime the cartridge correctly, follow this procedure every time you fit a cartridge.
Installing the cartridge in the
machine.
On first use, screw the filter
cartridge into the bottom of
the water tank.
Place a 0.5 L container
underneath the steam nozzle.
PREPARING THE APPLIANCE
Pull out and fill the
water tank.
Put it back in place by
pressing firmly and
close the lid again.
Open the coffee
bean container lid.
Add the coffee beans
(250g maximum).
Close the coffee
bean container lid
again.
Do not fill the water tank with hot water, milk or any other liquid.
If you turn on the appliance
when the water tank is not in place or not correctly filled (under the “min.” level,), the “fill water
tank” light will come on and making an espresso or a cup of coffee will be made impossible
Check that the coffee beans do not contain any foreign particles such as grit, as any damage
caused by the presence of foreign particles will negate the guarantee.
Do not put water into the coffee bean container.
Remember to fit the drip tray to avoid waste water flowing onto the work surface and staining it or
scalding you.
Check that your water tank is clean.
NEVER PUT GROUND COFFEE IN THE COFFEE CONTAINER.
It is recommended that you do not use oily, caramelised or flavoured coffee beans for this
machine. These kinds of beans may damage the machine.
