6
GB
FIRST USE / SETTING MACHINE PARAMETERS
Use the rotating button to select a function, increase or reduce values. Confirm your choice using
the OK key.
The appliance will ask you to set:
RINSING OF CIRCUITS
Select
Confirm
When you first use your appliance, it will ask you to
set several parameters. If you unplug your appliance,
you will again be asked for some of these parameters.
Use the rotating button to
choose a language (high-
lighted). Press the OK key
to validate.
Press
to turn your
appliance on. Follow the
instructions that appear
on the “choice of
language” screen.
Language
Volume Unit
Date
Clock
Auto-off
Auto-on
Water Hardness
Rinsing out the coffee circuit :
Once you have turned the machine on and the preheating
stage has completed, you can rinse out the coffee circuit.
Place a container under the coffee outlets then select "YES"
from the menu proposed. The rinsing cycle will stop auto-
matically after about 40 ml.
Rinsing out the steam circuit :
Place a container under the steam nozzle. Press
the
key to rinse the steam circuit. The rinsing
cycle will stop automatically after the volume of
water displayed has flowed through.
Press
at any time to display menus to perform rinsing and then select MAINTENANCE => OK
=> RINSING.
When being used for the first time, it is possible that the machine will ask to be filled up. Just fol-
low the instructions on the screen.
WHEN RINSING PROCESS IS IN PROGRESS, HOT WATER COMES OUT THROUGH THE NOZZLES.
BE CAREFULL NOT TO BE SCALDED.
It is best to perform rinsing after the appliance has remained unused for several days.
- +
You can select your chosen language from those offered.
Choose either ml or oz as your measurement unit.
You must set the date.
You can choose between 12 hour or 24 hour time display.
You can choose the period after which your appliance will stop automatically, from 30 minutes to
4 hours by 30 minute increments.
You can automatically start pre-heating of your appliance at your chosen time.
You must set your water hardness between 0 and 4. See “Water hardness measurement” section.
